Our Brands

Quality Marine Paints and Coatings

International Marine Coatings
HB Body
Vemar
International Marine Coatings

Quality Marine Paints and Coatings

Primers

Intergard 269

Intergard 269

A quick drying two pack epoxy holding primer / tie coat which is suitable for overcoating after extended periods of weathering.

Intergard 251

Intergard 251

The fast drying and handling properties of Intergard 251 coupled with extended overcoatability make this an excellent primer for factory application prior to full system application on site. Intergard 251 is a two component anticorrosive zinc phosphate epoxy primer for use in both new construction and industrial maintenance for a wide range of anti-corrosive coatings systems.

interstore alkyd primer

Interstores Alkyd Primer

A quick drying, one pack primer. Interstores Alkyd Primer is surface tolerant, compatible with most substrates and can be overcoated with a wide range of finishes.

Surface Tolerant

interstore alkyd primer

Interseal 670HS

A low VOC, two component high build, high solids surface tolerant epoxy maintenance coating.

Interplus 356

Interplus 356

Interplus 356 is a low VOC, two component, high build surface tolerant epoxy primer, specifically designed for use at low temperatures or where rapid overcoating is essential. Pigmented with aluminum and MIO for improved corrosion resistance, Interplus 356 is an ideal choice for maintenance in aggressive offshore environments.

Finishes

Interlac 665

Interlac 665

A single component alkyd gloss enamel finish.

Interthane 990

Interthane 990

A two component, high gloss, polyurethane finish, Interthane 990 provides excellent durability and flexible application. With an over 20 years’ global track record, Interthane 990 is a trusted solution providing extended recoat windows, long term protection and aesthetics retention in new construction and maintenance.

Intergard 740

Intergard 740

A two component epoxy finish coat suitable for brush, roller and spray application.

Marine Paints

Intertuf 262

Intertuf 262

A low VOC, two component corrosion inhibitive surface tolerant epoxy. Provides surface tolerant application and high build formulation. Can be utilised with an alternate converter for low temperature or fast recoat applications.

Intergard 263

Intergard 263 is an epoxy tie coat which maximises adhesion of anti-fouling coatings to existing coatings. Suitable for use in new construction and maintenance, Intergard 263 is highly versatile and is compatible with a wide range of new and aged coatings.

Intershield 300

Intershield 300

One of the offshore industry’s most trusted solutions with almost 30 years’ track record, Intershield 300 is a two component, abrasion resistant aluminum pigmented pure epoxy coating providing excellent long term anticorrosive protection. Curing down to -20°C (-4°F), Intershield 300 is an all year round solution for new construction and maintenance projects. As a universal primer, Intershield 300 can be used in, amongst others, atmospheric, submerged, deck and tank applications.

Antifoulings

Interspeed 6400

Interspeed 6400

TBT free, controlled depletion polymer (CDP) self polishing antifouling system.

Interspeed 6200

TBT free, controlled depletion polymer (CDP) self polishing antifouling system.

HB Body

Auto Refinishing Products

Primers

P411 4:1:1 WET ON WET PRIMER

High quality acrylic sealing primer, ideal for “wet on wet” application over all metals O.E.M. (E-COAT) cataphoresis panels, plastic bumpers and parts. 4:1 mixing ratio with H 729 Hardener for Primers NORMAL. Easy to use with excellent final finish.  Requires one coat (15 – 20μm), dries fast and can be re-coated within 20 – 30 minutes.

P334 4:1 HS FILLING PRIMER

High quality acrylic – filling, sealing primer for partial and full automotive refinishes. Suitable for original or old paint work and ideal for unsanded O.E.M. (E-COAT) panels. Its versatility enables both application at normal, medium and high film thickness with intermediate sanding or “wet on wet” application with an isocyanate based H 729 Hardener for Primers NORMAL / FAST. Dues to its high filling power and vertical stability, higher film thickness is possible. The fast drying and excellent levelling of this primer guarantee efficient application and fast sanding. It is cured with an isocyanate based H 725 Hardener for Primers FAST / SLOW. One of its greatest advantages is that it is ready for sanding after 2-3 hours air dry at 23 ºC (73ºF).

P307 4:1 HS FILLING PRIMER

2K high build acrylic primer. 4:1 mixing ratio with H 725 Hardener for Primers FAST / SLOW or H 729 Hardener for Primers NORMAL. Ideal adhesion to unsanded OEM panels. Compatible with all paints systems.

HBBODY 961

P961 1K ETCH PRIMER

1K direct to all metals anticorrosive primer. Overpainted with all paint systems. Suitable for application over all metal surfaces (galvanized, aluminium, stainless steel, bare metal, chrome). Suitable for “wet-on-wet: application over brand new panels where filler has not been applied. When using over old paint, P 961 can be used as a filling primer that have to be sanded before painting. Adheres nicely to non sanded surfaces and can be painted over with all paint systems.

HBBODY 981

P981 1Κ EPOXY PRIMER

Fast drying 1K Epoxy Primer. Suitable for all metal substrates as galvanized, stainless, aluminium, bare metal and OEM (E-COAT). It has mild anticorrosive properties, excellent coverage and can be overpainted with all HB BODY Paint Systems.

HBBODY 980

P980 1K PRIMER

Fast drying 1K filling primer suitable for all kinds of paints (synthetic – single coat or base coat). Apply in thin layers (1,3 – 1,8mm) over sanded areas only. 4:1 mixing ratio with 740 Acryl Normal Thinner (Reducer). Can be sanded within 10 – 30min.

Clears

HBBODY 894

C894 CLEAR ULTRA HS 2:1

C894 Clear Ultra HS is an ultra high build clear coat with excellent levelling, fast hardening and superior high gloss retaining. This product is suitable for all top quality full and partial refinishes. C894 Clear Coat is a more environmentally friendly product because of its high solid content. Has superior coverage, only one and a half coats, a far more cost saving solution. Mix at a ratio of 2:1 with Hardener for Topcoats H 735 FAST / H 734 NORMAL / H 733 SLOW. Curing time is 25 – 40 minutes at 60°C (140°F) depending the hardener.

C 898 CLEAR ULTRA HS 2:1

2K acrylic 2:1 quick drying Ultra HS clear coat, suitable for full and partial refinishes. Use with Hardeners Ultra HS H 737 SLOW or H 738 NORMAL. Force drying is only 5 min. in 60°C (140°F).

C499 CLEAR HS SR 2:1

C499 Clear HS SR 2:1 is a 2K acrylic crystal clear, scratch resistant and high gloss clear coat. Due to its high build, excellent levelling and high gloss this product is suitable for all top quality full and partial (spot panel) refinishes. Mix at a ratio of 2:1 with Hardener for Topcoats H 752 SLOW / H 753 NORMAL / H 754 FAST and up to 20% 740 Acryl Normal Thinner / 741 Acryl Slow Thinner (Reducer). Curing time is 10 – 30 minutes at 60ºC depending the hardener.

HBBODY 493

C493 MATT CLEAR HS 2:1

C493 Matt Clear HS 2:1 is a high quality clear coat designed to give a perfect matt finish for full and partial refinishes. Gives an excellent smooth surface and it is easy to handle. Has very good properties in weather and chemicals resistance and it is fast drying. Mix at a ratio of 2:1 with H 753 Hardener for Topcoats NORMAL.

BODY 698 CLEAR HS SR 2:1

A 2K HS Clear Coat, with excellent leveling and high gloss, long lasting protection. Easy to apply due to its high viscosity formula. Fast hardening properties for spot panel and full automotive repairs. Use with BODY 620 Hardener or Hardeners for Topcoats H 752 SLOW, H 753 NORMAL & H 754 FAST.

BODY 691 2:1 UHS SR

Body 691 Clear SR is a 2K Ultra HS Clear Coat with excellent leveling, high gloss and long lasting protection. Easy to apply for all types of refinish i.e, partial – full and spot repair. Mixing ratio is 2:1 with Hardener for Topcoats H 752 SLOW / H 753 NORMAL / H 754 FAST. Can be diluted up to 20% with 740 Acryl NORMAL / 741 Acryl SLOW / 742 Acryl EXTRA SLOW Thinner (Reducer).

Finishes

Silicon Alu Paint

SILICON ALU PAINT

Silicon Alu Paint is a special, silicon-based paint with aluminium, for the coating of metallic surfaces exposed to high temperatures. It has excellent thermal resistance up to 600°C (1112°F). It can be used to paint heated objects such as stoves, barbecue grills, fireplace external panels, exhaust tubes, etc. Also suitable for industrial applications where resistance to high temperatures is required. It can be applied by spray gun, roller or brush. Available in a semi-gloss dark grey metallic shade.

AUTOEMAIL METALLIC PAINT STANDARD

Fast drying metallic base coat. Use as 2:1 mixing ratio with 740 Acryl NORMAL Thinner / 741 Acryl SLOW Thinner (reducer). Apply in three coats for a smooth surface. It can be applied either on earlier layers of paint or on primer treated surfaces that have subsequently been sanded (sanding paper P600-1200). After 10 – 15 minutes drying HB BODY Clear coats can be applied. Available in various standard shades.

AUTOEMAIL 2K ACRYLIC PAINT STANDARD

A two component quick drying acrylic resin based paint with scratch resistant properties that has high durable gloss as well as chemical, severe weather and mechanical durability. The wide variety of shades covers almost all car manufacturers. Use as 2:1 mixing ratio with Hardener H 752 SLOW / H 753 NORMAL / H754 FAST. Can be manufactured to any shade it is required.

Rally

RALLY SYNTHETIC PAINT

Synthetic air drying alkyd resin paint with reliable drying time, high level and permanent gloss. Excellent coverage and excellent resistance to severe weather conditions. It is especially suitable for high quality automotive repairs. Available in various standard shades and can be manufactured to any shade if required. It can be diluted 20 – 25% with 750 SYNT Thinner or with 20:80 Hardener, as an isocyanate based cure accelerator. It can be applied over old paint and on primer treated surfaces that have previously been sanded (sanding paper P400 – P600).

Bumper-Paint

BUMPER PAINT

Fast drying 1K paint for restoring OEM look of plastic bumpers and plastic parts. Easy to apply with excellent mechanical resistance due to its high elasticity. It is also available in a texture form.

BUMPER PAINT TEXTURE

Fast drying 1K texture paint for plastic parts and for restoring OEM look of plastic bumpers. Easy to apply with excellent mechanical resistance due to its high elasticity. It is also available in a non-texture form.

Polishes

805

805 SUPER CUT

A high quality machine polishing compound coarse suitable for the removal sanding scratches from P1500 and anything finer. Also suitable for the removal of car wash scratches and for the removal of orange peel giving a deep and lasting shine. Silicone free and suitable for all paint finishes including new and aged cured.

806 POWER POLISH

A high quality medium – fine machine polishing compound. 806 Power polish is the second step polish required in the process and compliments the 805 Super cut. 806 Power polish removes and cleans any imperfections and fine sanding lines without leaving any compound swirl. Silicone free and suitable for all paint finishes including new and aged cured. This leaves a permanent finish where the swirls will not re appear.

807

807 SEAL POLISH

A high quality fine polishing compound. 807 Seal polish is the final polish required in the process of polishing. With one step you polish and seal permanently. Silicone-free. Removes small surface imperfections, gives a perfect hologram free finish and a water repellent effect. Can be used with HB yellow polishing pad or HB waffle polishing pad.

808

808 CUT & POLISH

A high performance one step polishing compound that can be used to cut and polish at the same time. It eliminates deep sanding marks and scratches from P1500 without burning in during high intensity, while it completes the polishing with a permanent hologram-free mirror finish. Special formula with new technology abrasives that can cut and polish all modern types of topcoats. Silicon-free.

802 BLEND + PREP PASTE

A waterborne paste used for lightly sanding old paintwork prior to painting, providing adhesion for the new coat of paint. Silicone and ammonia free. It can be used in place of the usual wet or dry sanding paper. It is applied with wet sponge or non woven pad.

Others

HBBODY 955

955 ANTI SLIP ADDITIVE

Anti-slip Additive is a supplementary product of the 955 Tough Liner series. Add a bottle dose of 120g in 800ml of ready mixed 955 Tough Liner. Apply the coarse texture with UBS gun for the maximum anti-slip effect. The use of Anti-Slip Additive gives an anti-slip effect in accordance with EN 13036-4 (BS 7976-2).

800 MATTING AGENT

Special agent developed for reducing the gloss of 1K or 2K paints and clear coats. Add 20 – 50% depending on the level of gloss required. After adding the matting agent, less thinner (reducer) is required.

803 FLEX AGENT

Special additive for flexing of 2K systems i.e. 2K Primers, 2K Paints or 2K Clear coats. Flexing all the above is absolutely necessary for painting elastic parts of the car (bumpers, spoilers etc). Add 5% by volume to the 2K Primers and 10-15% by volume to 2K Paints and Clear coats, after the hardener is added according to the instructions of the 2K product.

804

804 ANTI SILICONE

Additive suitable for the prevention and confrontation of silicon craters. Use 10ml of 804 Anti Silicone (one cap approx.) for every 500ml of ready-to-spray mixed paint. The mix must be applied in two light coats over the craters until they disappear. After adding 804 Anti Silicone to the paint mix ensure that is mixed well. Apply the Paint / Additive mixture with a spray gun.

Vemar

Yacht Coatings

Primers

alushield

ALUSHIELD

Two component Epoxy primer, suitable for use above and below the waterline. Contains aluminium flakes and offers excellent protection against the phenomenon of osmosis on GRP vessels, while it can be used as a tie coat for the application of Antifouling, or a primer-intermediate coat for the application of compatible topcoats on all types of substrate.

VEMASHIELD

Two component Epoxy primer, with excellent anticorrosion properties and superb adhesion on GRP, wood, steel and aluminium. It can be used above and below the waterline providing exceptional barrier properties when applied on carbon steel vessels and as a part of an osmosis treatment scheme for GRP vessels. Contains zinc phosphate.

aluprime

ALUPRIME

A fast drying, Vinyl based one component primer, reinforced with aluminium flakes for superior barrier properties. Used as a sealer and surface tolerant primer onto wood, epoxy primers and old existing Antifouling.

Antifoulings

COMFORT

COMFORT

High performance self-polishing antifouling with an exceptionally controlled cuprous oxide and advanced biocides release rate.
Superior protection of the bottom from the development of algae, macrofouling and other microorganisms.
Ideal for GRP, wooden and steel vessels (except aluminium) developing speeds up to 29 knots.

COMFORT PLUS

High performance copper free self-polishing antifouling with an exceptionally controlled unique biocides release rate. It does not contain copper. Superior protection of the bottom from the development of algae, macrofouling and other microorganisms. Ideal for GRP, wooden, steel, aluminium and light alloyed vessels, developing speeds up to 29 knots.

HI SPEED PLUS

High performance hard matrix antifouling that creates a smooth surface thus reducing the friction between the hull and the water resulting to a speed increase. It does not contain copper.
Superior protection of the bottom from the development of algae, macrofouling and other microorganisms with the use of unique biocides.
Ideal for propellers and GRP, wood, steel, aluminium and light alloyed vessels, developing speeds over 30 knots.

Fillers

ULTRAFILL

ULTRAFILL

Two component lightweight Epoxy Filler. A solvent free easy to sand product. Ideal for overall fairing above and below the waterline without sagging.

Its special formulation offers superior mechanical strength while remaining flexible. Suitable for all types of substrate (steel, wood, GRP etc.)

ULTRAFINE

ULTRAFINE

Finishing two component Epoxy Filler. It may be applied on top of ULTRAFILL Filler. After sanding it creates a velvet like pores free surface. Ideal for the repair and the prevention of the phenomenon of osmosis. Easy to sand.

After sanding, sealing of the surface with a suitable VEMAR’s primer is required. Applicable to all types of substrates (steel, wood, GRP e.t.c)

Varnishes

Cleaner

TEAK DEFENDER CLEANER

Water based teak cleaning solution
Removing organic residues on exposed wood surfaces without affecting deck caulking, paint or other deck equipment. The first step of the Teak Defender system.

TEAK DEFENDER BRIGHTENER

Water based teak brightening solution
Restoration of the original wood colour without affecting deck caulking, paint or other deck equipment. The second step of the Teak Defender system.

TEAK DEFENDER SEALER

Water based wood protection solution
A protective solution for exterior bare wood. The third step of the Teak Defender system contains active substances that protect the cellulose structure of the wood from degradation while preventing the discolouration caused by excessive sunlight exposure.

majestic_satin_varnish

MAJESTIC SATIN VARNISH

One component poly-urethane alkyd based satin varnish
A quick drying, satin finish, polyurethane modified, alkyd-based varnish. Used as a finishing coat over MAJESTIC Gloss varnish or as a repair coat over intact varnish layers.

majestic_gloss

MAJESTIC GLOSS VARNISH

One component poly-urethane alkyd based gloss varnish
A high gloss, polyurethane modified, alkyd-based varnish protecting wood against decomposition and weather discolouration. It can be used on new or aged various types of wood surfaces to provide a flawless mirror like finish.

Others

sentinella

SENTINELLA

One component modified Alkyd based bilge paint.
A moisture-resistant bilge paint that protects against fuel & chemical spillage while offering easy cleaning properties and abrasion resistance

909 POLISHING COMPOUND MARINE

One step polishing compound
A high performance silicon free polishing compound with technologically advanced abrasives providing cutting and polishing properties for all types of topcoats and gelcoat.

900

LT REMOVER 900

Mild water-based paint stripper used to remove one component products. Does not contain methylene chloride or other solvents that may affect two component epoxy-based products. Its mild synthesis is optimal for the removal of old antifouling layers and one component alkyd, acrylic and vinyl based primers without affecting the osmotic protection layers or the gelcoat.